Length : 10 FeetColor : BLACKMaterial : EPDM RubberComposition : Double-Side Tape, Bolt & Nut 10 SetGift : TECHNICA Decal sticker 1ea (185mm ×15mm)Do not include installation. But, You can always see in description.The double side tape is to help installation easy.This product necessarily need to bolt& Nut for installation.if you install using only by double side tape, It will be fall off.
Features
It is Material EPDM Rubber. You can cut to proper length.
So, It can be mounted on all vehicles.
This product has been designed at right angles.
So, a plane surface Affects the item at a right angle.
The curve shape under bumper plane of the aero lip may seem otherwise Depending .
Typically used as follows. (You can visit our store and buy the products)
- Front LIp - 7.5 feet
- Side skirts(Left,Right) - 7.0 feet × 2ea
- Rear Lip -7.5 feet.
So, You must check Length at Installation position before order.
About Front Splitter?
Works on interior and exterior trim, A must have for any mechanic, audio tech, restorator, or do it yourselfer
In a standard stock car or in modifications for specialist race series, cars will undergo dynamic development to help increase these downforce levels. Normally lowering the car to a certain ride height level as well as a lower frontal area will help to increase the desired downforce requirements
Also it is generally known that a increase in front downforce while entering the turn in for a corner will help to combat understeer.
This can help to balance a car more and having more grip to maximise steering inputs to hit the apex.
letting you come on the power more quickly, producing better lap times.
In a standard stock car or in modifications for specialist race series, cars will undergo dynamic development to help increase these downforce levels. Normally lowering the car to a certain ride height level as well as a lower frontal area will help to increase the desired downforce requirements
Also it is generally known that a increase in front downforce while entering the turn in for a corner will help to combat understeer.
This can help to balance a car more and having more grip to maximise steering inputs to hit the apex.
letting you come on the power more quickly, producing better lap times.
About Side Skirts?
The main goal of side skirts is to create an area of low pressure between the car and the track, generating increasing pressure as the car increases in speed making the car stick to the road.
Lots of different aids have been designed around this area, including side skirts to increase downforce.
These are a way of channeling the cars low pressure to the rear of the car and directing it to the rear diffuser.
It also prevents high pressure air from around the car interfering with the low pressure air underneath the car. Linked closely to the performance of the whole aerodynamic package.
With true side skirt introduction, creating a vacuum effect, sucking the car onto the floor with higher speeds.
Lots of different aids have been designed around this area, including side skirts to increase downforce.
These are a way of channeling the cars low pressure to the rear of the car and directing it to the rear diffuser.
It also prevents high pressure air from around the car interfering with the low pressure air underneath the car. Linked closely to the performance of the whole aerodynamic package.
With true side skirt introduction, creating a vacuum effect, sucking the car onto the floor with higher speeds.
Check out 10 Feet (305cm) FRONT BUMPER SPOILER LIP SPLITTER VALENCE For All Vehicles
http://www.ebay.com/itm/10-Feet-305cm-FRONT-BUMPER-SPOILER-LIP-SPLITTER-VALENCE-For-All-Vehicles-/261070212169?hash=item3cc8ff4c49&vxp=mtr via@ebay
If you want Large purchase, Please give us E mail
kmptrade9@gmail.com
or If you want Free shopping with a little discount, Please visit here !
댓글 없음:
댓글 쓰기